Tying a Bow with a Fork

Create This Beautiful Bow Using a Fork

Supplies:

Fork

18" of Ribbon (I prefer 1/8" to 1/2")

Step #1: Place your ribbon behind your fork. The backside of the ribbon should be face up.

Step #2: Cross your right side ribbon across your fork, like so.

Step #3: Cross the left sided ribbon over the right side.

Step #4: Taking the ribbon that is under the ribbon cross. In this case, it was your original right ribbon and bring it up towards the top of the fork.

Step #5: Bring the ribbon through the center opening of the fork. Don't let it go or it will fall out.

Step #5 (cont)

Step #6: Take the top ribbon (the original left handed ribbon) and thread it through the bottom center opening of the fork.

Step #7: Pull tight. Now both of the ends should be through the center of the fork and pointed out the back.

Step #8: Flip Over the fork. This is what you should see from the back.

Step #9: Tie a single knot in the back and pull as tight as you can.

Step #10: Slide the bow off the fork and pull tight again. Adjust as needed.

Step #11: Trim off excess ends.

ALL DONE!!!

Be sure to leave comments or send me an email if this tutorial helped you at all. Feel free to send me questions and pictures of your finished projects!

Instructions Written By: Mack

All rights reserved

#Bow #Fork #Ribbon #Tutorial